100G CFP4 TRANSCEIVER

• 100G CFP4 TRANSCEIVER

  

• Specifications

• Features

• Applications

• Downloads

　　HONSEV's 100Gb/s transceiver module for optical communication applications compliant to 100GBASE of the IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of VCSEL optical signals over 4 multimode fibers for 100Gb/s optical transmission. Reversely, on the receiver side, the module receives 4 channels of VCSEL optical signals over 4 multimode fibers and then converts them to 4 output channels of electrical data.


　　The high speed VCSEL transmitters and high sensitivity PIN receivers provide superior performance for 100Gigabit Ethernet applications up to 100m links over OM4 multimode fibers and compliant to optical interface with IEEE802.3bm Clause 95 100GBASE-SR4 requirements.


　　This product contains an MTP/MPO optical connector for the optical interface and a 56-pin connector for the electrical interface. Figure 1 shows the functional block diagram of this product.

* Hot-pluggable CFP4 form factor
　　* Compliant with the CFP MSA, IEEE 802.3, and OTN series Protocols
　　* Supports 103.1Gb/s and 112Gb/s aggregate bit rates
　　* VCSEL/EML transmitter
　　* CAUI/CPPI electrical interface
　　* Duplex LC receptacles/ MPO receptacle
　　* Digital diagnostics functions are available
　　* Maximum link length of 10km on SMF/100m on MMF
　　* Single 3.3V power supply
　　* Low power dissipation<9W
　　* Operating case temperature 0°C to +70°C
　　* RoHS-6 Compliant

　　Applications:
　　* 100GBASE Ethernet
　　* OTN OTU4
　　* 128G Fiber Channel